Dynamics of photon–photon entanglement in a bimodal nonlinear nanocavity

The photon–photon entanglement dynamics in a bimodal nanocavity, filled with a centrosymmetric nonlinear medium, is studied. In the present study, we have included the first and third order susceptibilities, giving rise to linear and the Kerr-type couplings. With no restrictions placed on the relative strength of these effects, we prove that the corresponding Hamiltonian is block-diagonal, each with ever-growing dimensions. We then show that, depending upon the initial total photon number, one needs to diagonalize a specific low-dimensional block, leading to the time evolution operator. Consequently, the time-evolution of the von Neumann entropy, as a measure of entanglement, is determined. From an analysis of the von Neumann entropy, we show that the entanglement exhibits oscillations, with plateaus, whose characteristics (period, duration, … ) strongly depend upon the strength of third order susceptibility. Moreover, it is shown that the entanglement is enhanced as the linear coupling is increased. The effect of detuning between photon's frequencies is also discussed.     

Additive assisted hydrothermal synthesis,characterization and optical properties of one dimensional DyPO4:Ce3+ nanostructures

One dimensional nanostructures of cerium doped dysprosium phosphate (DyPO₄:Ce³⁺) were synthesized via hydrothermal route in the presence of different surfactants [sodium dodecyl sulfate (SDS), dodecyl sulfosuccinate (DSS), polyvinyl pyrollidone (PVP)] and solvent [ethylene glycol and water]. The prepared nanostructures were characterized by Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FE-SEM), Transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), UV-VIS-NIR absorption spectrophotometer and photoluminescence (PL) studies. The PXRD and FTIR results indicate purity, good crystallinity and effective doping of Ce³⁺ in nanostructures. SEM and TEM micrographs display nanorods, nanowires and nanobundles like morphology of DyPO₄:Ce³⁺. Energy-dispersive X-ray spectra (EDS) of DyPO₄:Ce³⁺nanostructures confirm the presence of dopant. UV-VIS-NIR absorption spectra of prepared compounds are used to calculate band gap and explore their optical properties. Luminescent properties of DyPO₄:Ce³⁺ was studied by using PL emission spectra. The effect of additives and solvents on the uniformity, morphology and optical properties of the nanostructures were studied in detail.     

A handheld mid-infrared methane sensor using a dual-step differential method for additive/multiplicative noise suppression

A miniature mid-infrared (mid-IR) methane (CH₄) sensor system was developed by employing a wide-band wire-source and a semi-ellipsoid multi-pass gas cell. A dual-step differential method instead of the traditional one-step differential method was adopted by this sensor to tune measuring range/zero point and to suppress the additive/multiplicative noise. This method included a first subtraction operation between the two output signals (including a detection signal and a reference signal) from the dual-channel detector and a second subtraction operation on the amplitudes of the first-subtraction signal and the reference signal, followed by a ratio operation between the amplitude of the second-subtraction signal and the reference signal. Detailed experiments were performed to assess the performance of the sensor system. The detection range is 0–50 k ppm, and as the concentration gets larger than 12 k ppm, the relative detection error falls into the range of −3% to +3%. The Allan deviation is about 4.65 ppm with an averaging time of 1 s, and such value can be further improved to 0.45 ppm with an averaging time of 124 s. Due to the cost-effective incandescence wire-source, the small-size ellipsoid multi-pass gas cell and the miniature structure of the sensor, the developed standalone device shows potential applications of CH₄ detection under coal-mine environment.     

The removal of H2S derived from livestock farm on activated carbon modified by combinatory method of high-pressure hydrothermal method and impregnation method

H₂S is considered as the main gas pollutant from livestock farm and activated carbon (AC) is widely used as adsorbent for H₂S. This paper focuses on the influence of modification conditions and operation conditions on the H₂S adsorption performance on AC samples. The H₂S adsorption performance on modified AC (MAC) samples by single and combinatory method has been investigated. It is concluded that the MAC by combinatory method of high-pressure hydrothermal method followed by alkaline solution impregnation method could promote the H₂S adsorption performance remarkably. The H₂S adsorption performance differs with different operation conditions. Meanwhile the samples of fresh AC and exhausted AC have been characterized using BET, FTIR, TPD and Boehm titration method. The experimental results are confirmed that the characteristics of AC have significant influence on the adsorption ability for H₂S.     

Hierarchical assemblies of Si3N4 nanostructures

In the present work, for the first time, we report the growth of hierarchical assemblies of Si₃N₄ nanostructures via catalyst-assisted pyrolysis of a polymeric precursor on the Si substrates. The synthesized products were characterized by using field emission scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. It is found that the size of the catalytic droplet plays a critical role on the formation of hierarchical assemblies of Si₃N₄ nanostructures rather than common single nanowire. A mechanism based on the Vapor–Liquid–Solid (VLS) process was proposed for the assembly of hierarchical Si₃N₄ nanostructures.     

Defect modes tuning of one-dimensional photonic crystals with lithium niobate and silver material defect

In this paper, a novel PCs defect mode is designed by inserting a Ag/LiNbO₃/Ag sandwich structure into periodically stacked TiO₂/MgF₂ dielectric superlattice. The band gap calculation is conducted using transfer matrix method. An emergence of defect mode around 525 nm is demonstrated. By applying an external voltage on this defect mode, remarkable wavelength tuning can be achieved. At normal incidence, a tuning bandwidth up to 70 nm is obtained by moderate change of external voltage from −250 to 250 V. This feature can be employed to fabricate practical tunable filters in visible region.     

A stable solid acid material: Sulfated ZrO2 dispersed on alumina nanotubes

Russian Journal of Physical Chemistry A - A tubular solid acid catalyst was designed by loading sulfated zirconia into γ-Al2O3 nanotubes using the method of stepwise deposition. The XRD, N2...     

A mathematical model for the admission process in intensive care units

A mathematical model is given for the admission process in Intensive Care Units (ICUs). It is shown that the model exhibits bistability for certain values of its parameters. In particular, it is observed that in a two-dimensional parameter space, two saddle-node bifurcation curves terminate at a single point of the cusp bifurcation, creating an enclosed region in which the model has one unstable and two stable states. It is shown that in the presence of bistability, variations in the value of parameters may lead to undesired outcomes in the admission process as the value of state variables abruptly changes. Using numerical simulations, it is also discussed how such outcomes can be avoided by appropriately adjusting the parameter values.     

原位合成Bi3O4Br/Bi12O17Br2光催化剂及其对磺胺甲噁唑降解性能

Bi_xO_yBr_z光催化剂在有机药物废水处理领域有着非常广阔的潜在应用价值,但因光生电子和空穴的快速复合而表现出较低的光催化效率,进而限制了其应用范围。通过简易的水解-焙烧法原位制得一种新型的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂,并以磺胺甲噁唑(SMX)为模拟药物污染物进行了光催化性能测试,对所制催化剂进行了X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)、电化学阻抗(EIS)、光致发光光谱(PL)等表征。结果表明所制备的Bi₃O₄Br/Bi₁₂O₁₇Br₂复合光催化剂具有较强的光生载流子分离率、较低的界面电荷转移电阻,进而展示出优异的光催化降解SMX性能,在模拟太阳光下照射30 min,SMX降解率达到87%,相较于纯的Bi₃O₄Br和Bi₁₂O₁₇Br₂催化剂,降解率分别提升了30%和24%。最后基于自由基捕获实验和催化剂能带结构分析了所制催化剂的降解机理。     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。